In automated industrial production, assembly line equipment plays a vital role. In the manufacturing industry of mass production and continuous production, assembly line and conveying equipment are warmly welcomed by users.
formation:
According to whether the production object moves, it can be divided into fixed production line and mobile production line.
According to the number of production varieties, it can be divided into single-variety production line and multi-variety production line.
According to the degree of production continuity, it can be divided into continuous flow production line and intermittent flow production line.
According to the way of realizing rhythm, it can be divided into forced-rhythm production line and free-rhythm production line.
According to the degree of mechanization, it can be divided into manual, semi-automatic and fully automatic production lines.
Operation method:
Before running the assembly line, it is necessary to confirm that the equipment, conveyed items, and operators are in a safe state, whether there are sundries in various moving parts, and whether the electrical circuit of the electrician is normal, and whether there is any noise in the motor operation.
To start the pipeline, follow these steps:
1. Turn on the main power supply, and the power indicator light is on before proceeding to the next step.
2. It is not allowed to open the circuit at the rear stage of the inverter during the operation of the assembly line. If maintenance is required, it must be carried out when the inverter stops running.
3. Start the electrical equipment in turn according to the process formulated by the process. When the previous electrical equipment is running normally, the next electrical equipment can be started.
4. Check whether the circuit is normal, turn on each circuit switch, generally the equipment does not respond, the inverter power indicator is on, the assembly line running indicator is off, the display panel is normal, and the fault code or error code appears.
5. According to the conveying capacity of the equipment, the staff should not touch the moving parts of the assembly line. During the operation of the assembly line, non-professional operators should not touch the control elements and electrical buttons, and strictly follow the regulations in the design of the conveyed items.
6. To stop the assembly line, press the stop button to wait for the system to stop completely. After each transmission part is stationary, the main power supply can be cut off to ensure the service life of the equipment and personal safety.
Introduction to the composition and operation method of the assembly line
